ORION HCCA-BP30 High Performance Bass Processor with 10V Output & Voltage Display

HCCA-BP30 Bass Processor – Powerful and Controlled Low-Frequency Performance

Upgrade your system with the HCCA-BP30 Bass Processor. It delivers strong and controlled low-frequency enhancement for high-performance setups.

As part of Orion’s HCCA lineup, this processor restores lost bass frequencies. As a result, your subwoofer produces deeper and harder-hitting bass. In addition, it improves accuracy and control.

Precision Bass Tuning

The HCCA-BP30 gives you full control over your bass response. Therefore, you can fine-tune your system with precision.

You can adjust:

• Sweep control to set the frequency center

• Width control to adjust the bandwidth

Because of this, you can target specific bass ranges. You can choose deep extension or tight, punchy bass.

High-Voltage Output Performance

The processor includes selectable output levels of 2.5V, 5V, 7.5V, and 10V. As a result, it works with standard amplifiers and high-power systems.

Moreover, it maintains clean performance with ultra-low distortion and high signal clarity. Your bass stays powerful even at high volume levels.

Advanced System Integration

The HCCA-BP30 is built for advanced installations. It supports both balanced and unbalanced inputs.

In addition, it includes ground isolation control and a built-in voltage display. Therefore, you can monitor system performance in real time.

Built for Serious Audio Systems

Whether you upgrade a factory system or build a competition setup, the HCCA-BP30 delivers reliable results.

• HCCA High Performance Bass Processor: Designed for high-power car audio systems, delivering deep, controlled bass enhancement for subwoofer setups.
• Bass Restoration Technology: Recovers low-frequency information lost in compressed or factory audio signals to restore full bass impact.
• Sweep Frequency Control: Adjusts the center frequency of the bass enhancement to target the exact bass range you want to emphasize.
• Width Bandwidth Control: Allows tuning of the bass restoration range for wide deep bass response or tighter, punchier bass.
• Selectable High Voltage Output: Choose between 2.5V, 5V, 7.5V, or 10V output levels to match your amplifier’s input sensitivity and maximize signal strength.
• Voltage Meter Display: Built-in voltage display allows real-time monitoring of your system’s operating voltage.
• Balanced / Unbalanced Input Selection: Ensures compatibility with both factory radios and aftermarket head units.
• Ground Isolation Control: Helps eliminate alternator noise and system interference using selectable grounding modes.
• Remote Bass Control Support: Allows real-time bass adjustment from the driver’s seat using the included remote bass knob.
• Competition-Level Signal Performance: High signal-to-noise ratio and ultra-low distortion ensure clean bass output even in high-power systems.

• Power Supply: 6.5V – 18V
• Maximum Input Level: 10V
• Maximum Output Level: 10.5V
• Input Sensitivity: 10.5V
• Input Impedance: >50K Ohms
• Output Impedance: 100 Ohms
• EQ Boost / Cut: 15 dB
• Signal-to-Noise Ratio: >110 dB
• THD @ 2V Output: <0.02%
• Channel Separation: >80 dB
• CMRR: -63 dB Balanced / -29 dB Unbalanced
• Frequency Response: 10 Hz – 30 kHz
• Subsonic Filter: 31 Hz – 71 Hz
• Current Draw: 210 mA
• Interchannel Gain Tracking: 0.1 dB
• Fuse Rating: 1A
• Dimensions: 7.28” x 4.13” x 1.54”