Description
AUDIOCONTROL Spike Series 8" Single 2 Ohm SubwooferHigh Excursion Design for Ultra Low Bass
- Fiber Matrix Paper Cone with Mica Coating
- 3-Layer High Temp Voice Coil Former
- Dual Damping System for Linear Bass Reproduction
- Dual Dust Cap System for Enclosure Compression Control
- Efficient Heavy-Duty Motor Design
- Removable Subwoofer Grille Included
PAIRINGS
Our Sonic Sommeliers Recommend the Following:
A single Spike Series 2 ohm subwoofer pairs well with the ACM-1.300 or ACX-300.1 for the conservative to moderate listener. For more provocative output, seek out the ACX-600.1.
Planning to enjoy the enthusiastic output from one of our LC-5.1300 or D-5.1300 ampliļ¬ers? The potent power delivered from the output of channel 5 is a superb match. Bon appétit!
For system designs utilizing two Spike Series 2 ohm subwoofers, we recommend the LC-1.1500… Scrumptious!
Longing after even more low frequency output? Planning to include three or more Spike Series subwoofers in your system? Consult an expert at your favorite authorized AudioControl dealer, or visit audiocontrol.com for more system conļ¬gurations that deliver ravishing audio reproduction.
specifications
thiele/small parameters
Nominal Impedance (Z) 2 ohms
DC Resistance (Re) ]] 1.6 ohms
Resonance Frequency (Fs) 51.6241 Hz
Piston Area (Sd) 0.0194 m2
Force Factor (BL) 9.7018 T.m
Mechanical Q Factor (Qms) 5.444
Electrical Q Factor (Qes) 0.525
Total Q Factor (Qts) 0.4788
Sensitivity 1W/M (SPL) 83.3836
Mechanical Comp (Cms) 0.0998 mm/N
Moving Mass (Mms) 95.2145 g
Linear Excursion (Xmax) . 8.5 mm
Volume Acoustic Comp (Vas) 5.2241 Ltr/ 0.1845 Cu ft
Reference Efficiency (NO.) 0.1314% RMS
Power (Pe) 350 Watts
Frequency Response 30-500 Hz
Voice Coil Diameter 2.0 in/50.8 mm
Displacement 0.05 cu ft/ 1.44Ltr
